» FRIMO TECHCENTER
We support you in product development right from the start - worldwide.
HEADS WITH BRAINS
FRIMO mix heads combine components perfectly
FRIMO PURe Mix Heads are available in both two-component and multi-component versions. Various sizes are available for the smallest to the largest applications. Straight mix heads are particularly ideal for injecting into a closed tool, while L-heads create advantages in laminar foaming.
We have mix heads available for selective or permanent mixing of up to six components. For RTM processes, we offer an advanced mix head with servo-pistons for three components.
With this mix head, the reaction profile and injection strategy can be adjusted according to the part requirements to reduce processing time.
The advanced FRIMO air-assisted spray head offers the widest range of process parameter variables and increased repeatability with the lowest possible material use.
MIX HEAD PRODUCT OVERVIEW
A solution for every application
High-Pressure Mix Heads
- MT Series
- MN Series
- MX Series
- MD Series
- ML and MXL Series
Low-Pressure Mix Heads
- MEL Series
MT SERIES MIX HEADS
L-shaped mix heads for the smallest to largest outputs
MT mix heads have been completely re-engineered and guarantee optimal processing of the entire range of popular PU systems. Up to six components precisely enter the mixing chamber through injection nozzles.
- Optimal mix with L-shape (output nozzle offset 90°)
- Steady, splash-free flow in open form
- Available with continuous pressure nozzle for constant mix pressure
MN SERIES MIX HEADS
Straight heads for a variety of applications
Slot-controlled straight mix heads in the MN series are particularly for polyurethane spray processes (PU CSM technology) and applications with components that contain fillers. The easy-mount design also makes these mix heads predestined for RIM processes.
- Variations for two to four components
- Outputs from 6 cm³/s up to 10.000 cm³/s
- Spray lance possible for complex geometries
- High-performance cutting unit for metered glass fiber addition
- Particularly easy to mount for RIM and RRIM processes
- Available with continuous pressure nozzle for constant mix pressure
MEL SERIES MIX HEADS
Agitator mix heads for elastomer applications
Cast systems, high viscosity materials, or reactive components and additives make mixing through reverse flow impossible. This is where the MEL series of mix heads comes into play, with special agitators inside the mixing chamber that ensure uniform mixture and steady flow, even for especially challenging systems.
- Six and eight component variations
- Standard hydraulic orifice control
- Extremely short, synchronized operation cycles possible
- Sophisticated mix chamber and agitator geometry
- Hardened steel model for optimal mix results, even with abrasive and viscous materials
- Available with continuous pressure nozzle for constant mix pressure
AUTOMOTIVE ALLIANCE MIX HEAD ADVANTAGES
- Compact design
- Lightweight
- Small size simplifies connection
- Self-cleaning mix head concept
- Special surface-treated piston for low-friction operation
- Robust, reliable, and low-maintenance due to the hardened materials that are used
